상품 설명
2-Channel 1000 Watt Power Amplifier
- 1000 Watts at 8 Ω bridged mono
- 2 x 500 Watts at 4 Ω; 2 x 250 Watts at 8 Ω
- Efficient Class D power
- Balanced combo input jacks
- Lightweight, two rack-space design
- Easy to read LED level and clip indicators
- Low pass filter
- Low-noise cooling fans
SPECIFICATIONS
Power Specifications:
Continuous power (20 Hz – 20 kHz):
– Both channels driven: 2 x 390 W at 4 ohms, 2 x 250 W at 8 ohms (0.5% THD),
Continuous power (20 Hz – 20 kHz):
– Both channels driven: 2 x 390 W at 4 ohms, 2 x 250 W at 8 ohms (0.5% THD),
2 x 500 W at 4 ohms, 2 x 270 W at 8 ohms (1.0% THD EIAJ)
– Bridged mono mode: 1 x 1000 W at 8 ohms, 1 x 520 W at 16 ohms
– Bridged mono mode: 1 x 1000 W at 8 ohms, 1 x 520 W at 16 ohms
Input Sensitivity: 1.0 V
Input Impedance: 10 K Unbalanced
Frequency Response: (at 10 dB below rated output power), 20 Hz – 25 KHz (+0/-3 dB)
Voltage Gain: 32 dB
Distortion: (SMPTE-1M) <0.5%
S/N Ratio: 110 dB
Protection: On/Off, mute, DC-fault, load
Controls Front: Front Controls: AC power switch, 2 channel level control; –∞ to +30 dB
Controls Rear: 30 Hz high-pass filter on/off, bridge/stereo/parallel mode
Signal Indicators: Signal present (green LED), clip (red LED), protection (red LED)
Power Indicators: 1 blue LED integrated with power switch
Input Connectors: Balanced XLR-F / ¼” combo
Output: Touch proof binding posts and Speakon® NL4 connectors
Power Supply: AC Power: 100 VAC, or 110 – 120 VAC or 220 – 240 VAC (50 / 60 Hz)
Dimensions (WxLxH): 19in x 11.2in x 3.5in
Weight: 12.8 lb
